How to put a Double Set (offset) into Steel Conduit Using a Conduit Bending Machine
55.8 هزار بار بازدید -
4 سال پیش
-
Student training aid for practical
Student training aid for practical skills how to bend steel (metal) conduit (Rigid Metal Conduit RMC) to produce a double set (offset). Using a conduit bending machine and 20 mm former. Includes a full demonstration on how to produce a double set (offset) into 20 mm steel conduit.
Sorry about the sound level we has a microphone issue but still very audible.
== 🕐 Time Stamps - Cut to the action 🕕 ==
00:00 - How to put a double set in steel conduit
00:47 - First make at 150 mm from one end
01:13 - Setting my mark for my first bend
01:38 - Setting up my conduit bending machine
02:05 - First bend
02:28 - Marking the position for my second bend
04:18 - Putting my conduit into make the second bend
06:02 - Pulling the second bend
06:53 - Checking the set is correct
08:41 - Adding more bend to my double set
09:07 - Is the set correct
Videos are training aids for City and Guilds (C and G) and EAL courses Level 1, 2, 3 plus AM2, AM2S and AM2E.
You can follow me day by day on Facebook, Instagram,Twitter and TikTok lookout for "GSH Electrical.
▶️ FACEBOOK www.facebook.com/gshelectrical/
▶️ INSTAGRAM instagram.com/p/BrIhZmrAYGDTmjMdb9lUNQodMevqsbDDki…
▶️ TWITTER mobile.twitter.com/gsh_electrical
▶️ TikTok vm.tiktok.com/ZMRBLFdhe/
#GSHElectrical #Electricaltrainingvideos #conduit
4 سال پیش
در تاریخ 1399/08/18 منتشر شده
است.
55,846
بـار بازدید شده