HOW TO FORM A STEEL CONDUIT OFFSET BEND - Apprentice electrician essentials

eFIXX
eFIXX
48.4 هزار بار بازدید - 3 سال پیش - An offset, or double set,
An offset, or double set, conduit bend is used to enter electrical accessory knockouts, metal trunking or route conduit round obstacles.

======================
🕐 TIME STAMPS 🕕
======================
00:00 Double set in steel conduit
00:43 First bend 30 degrees
00:59 Setting the mark
01:08 30 degrees
01:23 Measure 50 mm
01:45 Magic mark
02:11 Mark against the former
02:49 Second bend
03:27 Under bent
04:00 Adding more bend
04:28 Touch more bending needed
05:17 Set to 50 mm
================================
🔦 More conduit videos from eFIXX  
👉http://www.efixx.co.uk/metal-conduit
👉http://www.efixx.co.uk/how-to-bend-co...
👉http://www.efixx.co.uk/conduit-instal...
==AD=====================================
Series produced in association with
Metpro - Conduit and accessories
👉 http://hub.efixx.co.uk/metpro
Bend-it-now - Conduit Bender
👉 http://hub.efixx.co.uk/bend-it-now
=========================================
📍SUBSCRIBE TO THE CHANNEL eFIXX helps electricians, electrical contractors, building services engineers, and electrical apprentices.  So if you've been on the tools for years or just starting your electrical journey, we'll help you stay up to date with the latest regulations and developments in the electrical industry.   👉http://hub.efixx.co.uk/youtube-subscribe
========================================  
⚡️ Take a deep dive into the latest electrical products, applications and technology
👉 http://hub.efixx.co.uk/essentials
=========================================
🚧 More resources for electrical apprentices and learners
👉 http://hub.efixx.co.uk/apprentice
=========================================  
#efixx #conduit #electrical
3 سال پیش در تاریخ 1400/08/25 منتشر شده است.
48,453 بـار بازدید شده
... بیشتر