Step by Step Guide on How to Bend Steel Conduit Back of Bend to Back of Bend (AM2 AM2s)
48.5 هزار بار بازدید -
5 سال پیش
-
A step by step guide
A step by step guide on how to bend steel conduit using back of bend to back of bend technique for AM2 and AM2S.
Students training aid for bending 20 mm Steel (metal) Conduit to produce a back of bend to back of bend to the correct measurement. Includes a full demonstration on how to produce these bends using set square and a conduit bending machine so the conduit from back of the bend to back of bend is at the correct measurement you require.
How to bend rigid metal conduit (RMC)
== 🕐 Time Stamps - Cut to the action 🕕 ==
00:00 - How to bend metal conduit back to back
01:23 - Measurement between boxes
02:26 - Measuring the position of the second bend
02:59 - Marking the conduit
03:54 - Lining the conduit up in the bending machine
05:04 - Bending the conduit
05:26 - Checking the conduit bends
06:39 - Are the measurements correct
🔵 Steel Conduit Life Hack How to Make Threading & Bending of Steel (metal) Conduit Loads Easier (EMT) • Steel Conduit Life Hack How to Make T...
Videos are training aids for City and Guilds (C and G) and EAL courses Level 1, 2, 3 plus AM2, AM2S and AM2E.
You can follow me day by day on Facebook, Instagram, Twitter and TikTok lookout for "GSH Electrical.
▶️ FACEBOOK www.facebook.com/gshelectrical/
▶️ INSTAGRAM instagram.com/p/BrIhZmrAYGDTmjMdb9lUNQodMevqsbDDki…
▶️ TWITTER mobile.twitter.com/gsh_electrical
▶️ TikTok vm.tiktok.com/ZMRBLFdhe/
#GSHElectrical #Electricaltrainingvideos #conduit
5 سال پیش
در تاریخ 1398/04/09 منتشر شده
است.
48,585
بـار بازدید شده