Building a Robot Chassis with Brass Square Tube, a Dremel, and Solder

In this video I show how to build a chassis for a balancing robot. Some 1/4" brass square tube is used to form the chassis. It is cut to length with a Dremel, deburred with some needle files, and soldered together. The end result is a strong chassis that is easy and cheap to build.

This video is part of a series showing how to build a balancing robot:

Part 1: Modify RC Servos for Continuous Rotation and External H-Bridge Control
Modify RC Servos for Continuous Rotat...

Part 2: [THIS VIDEO] Building a Robot Chassis with Brass Square Tube, a Dremel, and Solder
Building a Robot Chassis with Brass S...

Part 3: First Steps with a GY-86 10DOF Sensor: MPU6050, HMC5883L and MS5611
First Steps with a GY-86 10DOF Sensor...

Part 4: 6DOF & 9DOF Sensor Fusion with Madgwick's Filter, MPU6050, HMC5883L (GY-86 Module)
6DOF & 9DOF Sensor Fusion with Madgwi...

Part 5: How to Use CC2500 PA LNA 2.4GHz Wireless RF Modules
How to Use CC2500 PA LNA 2.4GHz Wirel...

Part 6: GPU-Accelerated Data Logging and Telemetry
GPU-Accelerated Arduino Data Logging ...

Part 7: How to Tune PID Control Loops Visually
How to Visually Tune PID Control Loops

• #science_technology
• #robot
• #chassis
• #brass
• #square_tube
• #ks_metals
• #solder
• #dremel
• #hobby
• #needle_file
• #balancing_robot
• #fabrication
• #diy
• #maker
• #servo