Making a DIY CNC Metal Lathe | The Spindle | #2
19.2 هزار بار بازدید -
3 سال پیش
-
This time I'm making the
This time I'm making the spindle for the DIY CNC metal lathe project. It will be driven by a 2.2kW AC motor by a 17mm V-belt. I used 3 UCF 207 bearing units and shaft collars for taking the axial forces on the bearings so the shaft doesn't move as the shaft holding screws wouldn't be enough. I hope you will enjoy the video.
Inspiration by
👉 https://www.seevid.ir/fa/result?ytch=UCKkFE8ue_rvxp_U39LJe8ig - mechanical ideas
👉 https://www.seevid.ir/fa/w/huHqMryLCzs - Dealing with axial forces idea
Check them out!
Part 1 [The Frame] : 👉 https://www.seevid.ir/fa/w/eZ79Wvqx-LM
Part 2 [The Spindle]: 👉 https://www.seevid.ir/fa/w/WsTtgETydw8
Part 3 [The Tool Post]: 👉 https://www.seevid.ir/fa/w/swFcsXjT5Uo
Part 4 [The X and Z Axis]: 👉 https://www.seevid.ir/fa/w/wBgvc1lc2dQ
Part 5 [The Control Box]: 👉 https://www.seevid.ir/fa/w/DHxK9wjozXc
Subscribe and hit the like button if you like the video and want more!
If you have any questions - comment down below.
Thanks for watching!
https://www.seevid.ir/fa/w/WsTtgETydw8 Intro
https://www.seevid.ir/fa/w/WsTtgETydw8 Overview of the spindle
https://www.seevid.ir/fa/w/WsTtgETydw8 Cutting, welding, assembling
https://www.seevid.ir/fa/w/WsTtgETydw8 Outro and final result
Facebook Page 👉 https://www.facebook.com/GBWMCNC
YouTube Channel 👉👉
3 سال پیش
در تاریخ 1400/03/30 منتشر شده
است.
19,203
بـار بازدید شده