How to connect a Rockwell PLC (EtherNet/IP) and a Modbus-TCP device

This video shows how to enable communication between a Rockwell ControlLogix PLC which uses EtherNet/IP and a Modbus-TCP-device (the example uses a Schneider Altivar 320 drive). In the demo, we will specifically show how to enable communication between EtherNet/IP and Modbus TCP.

In the scenario we are using, we have connected a Schneider Altivar320 drive which uses Modbus-TCP to the bottom side of the Linking device.  On the front side, I am connected to a Rockwell Control Logix L71. The neat thing about this linking device is that everything is handled from inside my familiar Logix Designer environment. The only thing I need to do is to download the Add-on profile for the product.

Ethernet/IP | Modbus-TCP | Rockwell Controllogix PLC | Linking device

________________________________________________________________________
HMS Industrial Networks Socials

Twitter: Twitter: hmsnetworks
LinkedIn: LinkedIn: hmsn..
Instagram: Instagram: hmsnetworks
Facebook: Facebook: HMSNetworksAB

• #science_technology
• #ethernetip
• #modbus_tcp
• #rockwell_automation
• #linking_device
• #hms_industrial_networks