How to connect a Siemens ET200S (PROFIBUS) to a Rockwell CompactLogix PLC (EtherNet/IP)
22.1 هزار بار بازدید -
8 سال پیش
-
In this demo, we will
In this demo, we will show how to enable communication between a PROFIBUS-based-device and a Rockwell CompactLogix PLC which uses EtherNet/IP. To do this we will use the Ethernet/IP to PROFIBUS DP Linking Device from HMS.
In the scenario we are using, I have connected a Siemens ET200S Distributed IO as a PROFIBUS slave. To this, I have connected a simple switch which gives me an on and off signal. The ET200S is connected to the bottom side of the Linking device. On the front side, I am connected to an Allen Bradley 1769-L16ER CompactLogix PLC.
Everything is handled from inside my familiar Logix Designer environment. Learn more:
https://www.anybus.com/home
________________________________________________________________________
HMS Industrial Networks Socials
Twitter: Twitter: hmsnetworks
LinkedIn: LinkedIn: hmsn..
Instagram: Instagram: hmsnetworks
Facebook: Facebook: HMSNetworksAB
#PROFIBUS #Rockwell #Anybus #HMSNetworks #ethernetip #plc
In the scenario we are using, I have connected a Siemens ET200S Distributed IO as a PROFIBUS slave. To this, I have connected a simple switch which gives me an on and off signal. The ET200S is connected to the bottom side of the Linking device. On the front side, I am connected to an Allen Bradley 1769-L16ER CompactLogix PLC.
Everything is handled from inside my familiar Logix Designer environment. Learn more:
https://www.anybus.com/home
________________________________________________________________________
HMS Industrial Networks Socials
Twitter: Twitter: hmsnetworks
LinkedIn: LinkedIn: hmsn..
Instagram: Instagram: hmsnetworks
Facebook: Facebook: HMSNetworksAB
#PROFIBUS #Rockwell #Anybus #HMSNetworks #ethernetip #plc
8 سال پیش
در تاریخ 1396/02/15 منتشر شده
است.
22,159
بـار بازدید شده