How to connect a Rockwell PLC (EtherNet/IP) to PROFIBUS slave using Anybus X-gateway

In this demo, we will show how to enable communication between a Siemens IO Device using PROFIBUS and a Rockwell Control Logix PLC using EtherNet/IP. To do this, we will use the Anybus X-Gateway PROFIBUS Master from HMS.

In my setup I have Rockwell ControlLogix L71 PLC and I want to communicate with a Siemens ET200S IO Device. The X-gateway acts as a translator between the two devices. So on the EtherNet/IP side the Rockwell PLC is the master – also called scanner. The slave or adapter on this side is the X-gateway. On the PROFIBUS side, the X-gateway is the master controlling the slaves – an ET200S IO device in this case.

Learn more:
https://www.anybus.com/products/gatew...

________________________________________________________________________
HMS Industrial Networks Socials

Twitter: Twitter: hmsnetworks
LinkedIn: LinkedIn: hmsn..
Instagram: Instagram: hmsnetworks
Facebook: Facebook: HMSNetworksAB

#PROFIBUS #Rockwellplc #ethernetip #anybus

• #science_technology
• #profibus
• #profibus_master
• #ethernetip
• #gateway
• #rockwell_automation
• #siemens
• #et200s
• #rockwell_controllogix_l71