How To Build Your Own Deadlift Platform w/ Your Logo
820.1 هزار بار بازدید -
7 سال پیش
-
In this video I explain
In this video I explain exactly how I made the deadlift platforms at Untamed Strength and how I put my logo on each one.
-Stack two 4'x8' sheets of 3/4" plywood. Glue and drill.
-Place one 4'x4' piece of 3/4" plywood on top, centered. Glue and drill.
-Place two 2'x4' pieces of 3/4" horse stall mats on each side of 4'x4' piece of plywood. Glue and drill with washers.
-Add logo
-Stain wood and coat with polyurethane.
Untamed Strength is a Strongman/Powerlifting gym in Sacramento CA.
http://www.trainuntamed.com
Follow me on IG @untamedstrength
-Stack two 4'x8' sheets of 3/4" plywood. Glue and drill.
-Place one 4'x4' piece of 3/4" plywood on top, centered. Glue and drill.
-Place two 2'x4' pieces of 3/4" horse stall mats on each side of 4'x4' piece of plywood. Glue and drill with washers.
-Add logo
-Stain wood and coat with polyurethane.
Untamed Strength is a Strongman/Powerlifting gym in Sacramento CA.
http://www.trainuntamed.com
Follow me on IG @untamedstrength
7 سال پیش
در تاریخ 1395/12/05 منتشر شده
است.
820,127
بـار بازدید شده