🚀The Ultimate Guide to Abaqus Meshing | From Beginner to Pro🚀 | Top-down & Bottom-up
134 بار بازدید -
4 هفته پیش
-
This video equips you with
This video equips you with the fundamentals of meshing in Abaqus.
We'll explore the core concepts, different meshing techniques, and tools to create high-quality meshes for your simulations.
🧐The video introduces Abaqus' Edit Mesh Toolset, allowing you to:
Manipulate nodes, elements, and the overall mesh for precise control.
Refine the mesh in specific regions to enhance accuracy.
The video concludes with a workshop showcasing:
Meshing of diverse parts using various techniques.
Editing and verification practices to refine and ensure mesh quality.
🤔🤔What is a Mesh?
In FEA, a mesh transforms a complex geometry into a collection of smaller, simpler elements. These elements, typically lines (1D), triangles/quadrilaterals (2D), or tetrahedra/hexahedra (3D), act as building blocks for the simulation.
Meshing methodology:
👉Top-Down: This technique strictly adheres to the part geometry, defining the mesh based on the model's boundaries.
👉Bottom-Up: This approach uses the geometry as a guide, allowing for more flexibility in mesh creation.
Meshing techniques in Abaqus:
✅Free meshing: Offers maximum flexibility for complex geometries but requires careful control.
✅Strucutred meshing: Creates uniform element patterns, ideal for simple geometries.
✅Swept meshing: Well-suited for elongated parts by sweeping a 2D profile along a path.
To create an acceptable mesh, you use the following process:
🔴Assign mesh attributes and set mesh controls
The Mesh module provides a variety of tools that allow you to specify different mesh characteristics, such as mesh density, element shape, and element type.
🔴Generate the mesh
The Mesh module uses a variety of techniques to generate meshes. The different mesh techniques provide you with different levels of control over the mesh.
🔴Refine the mesh
The Mesh module provides a variety of tools that allow you to refine the mesh:
The seeding tools allow you to adjust the mesh density in selected regions.
The Partition toolset allows you to partition complex models into simpler subregions.
The Virtual Topology toolset allows you to simplify your model by combining small faces and edges with adjacent faces and edges.
The Edit Mesh toolset allows you to make minor adjustments to your mesh.
🔴Optimize the mesh
You can assign remeshing rules to regions of your model. Remeshing rules enable successive refinement of your mesh where each refinement is based on the results of an analysis.
🔴Verify the mesh
The verification tools provide you with information concerning the quality of the elements used in a mesh.
⚡Mesh geometries in Abaqus
The problems can be divided into three groups in aspect of solution Space: 1D, 2D, and 3D. For each one of these groups, a number of mesh geometries are introduced. For 1D you use line elements, for 2D you can choose Triangles or quadrilateral elements. For 3D you can choose Tetrahedra, Triangular prism, or Hexahedra elements.
0:00- Meshing in one glance
0:26- An overview of this tutorial
2:14- What is mesh?
3:56- Mesh types for different geometries
4:39- What is the appropriate mesh size? (Mesh convergence)
6:30- Mesh module toolbox in Abaqus
6:50- Meshing methodologies
9:50- Meshing techniques
13:47- What is mesh compatibility?
14:57- Orphan mesh part
16:14- Introducing Edit mesh toolset
16:40- Verifying the mesh
22:25- Workshop
33:01- Outro of this tutorial
We'll explore the core concepts, different meshing techniques, and tools to create high-quality meshes for your simulations.
🧐The video introduces Abaqus' Edit Mesh Toolset, allowing you to:
Manipulate nodes, elements, and the overall mesh for precise control.
Refine the mesh in specific regions to enhance accuracy.
The video concludes with a workshop showcasing:
Meshing of diverse parts using various techniques.
Editing and verification practices to refine and ensure mesh quality.
🤔🤔What is a Mesh?
In FEA, a mesh transforms a complex geometry into a collection of smaller, simpler elements. These elements, typically lines (1D), triangles/quadrilaterals (2D), or tetrahedra/hexahedra (3D), act as building blocks for the simulation.
Meshing methodology:
👉Top-Down: This technique strictly adheres to the part geometry, defining the mesh based on the model's boundaries.
👉Bottom-Up: This approach uses the geometry as a guide, allowing for more flexibility in mesh creation.
Meshing techniques in Abaqus:
✅Free meshing: Offers maximum flexibility for complex geometries but requires careful control.
✅Strucutred meshing: Creates uniform element patterns, ideal for simple geometries.
✅Swept meshing: Well-suited for elongated parts by sweeping a 2D profile along a path.
To create an acceptable mesh, you use the following process:
🔴Assign mesh attributes and set mesh controls
The Mesh module provides a variety of tools that allow you to specify different mesh characteristics, such as mesh density, element shape, and element type.
🔴Generate the mesh
The Mesh module uses a variety of techniques to generate meshes. The different mesh techniques provide you with different levels of control over the mesh.
🔴Refine the mesh
The Mesh module provides a variety of tools that allow you to refine the mesh:
The seeding tools allow you to adjust the mesh density in selected regions.
The Partition toolset allows you to partition complex models into simpler subregions.
The Virtual Topology toolset allows you to simplify your model by combining small faces and edges with adjacent faces and edges.
The Edit Mesh toolset allows you to make minor adjustments to your mesh.
🔴Optimize the mesh
You can assign remeshing rules to regions of your model. Remeshing rules enable successive refinement of your mesh where each refinement is based on the results of an analysis.
🔴Verify the mesh
The verification tools provide you with information concerning the quality of the elements used in a mesh.
⚡Mesh geometries in Abaqus
The problems can be divided into three groups in aspect of solution Space: 1D, 2D, and 3D. For each one of these groups, a number of mesh geometries are introduced. For 1D you use line elements, for 2D you can choose Triangles or quadrilateral elements. For 3D you can choose Tetrahedra, Triangular prism, or Hexahedra elements.
0:00- Meshing in one glance
0:26- An overview of this tutorial
2:14- What is mesh?
3:56- Mesh types for different geometries
4:39- What is the appropriate mesh size? (Mesh convergence)
6:30- Mesh module toolbox in Abaqus
6:50- Meshing methodologies
9:50- Meshing techniques
13:47- What is mesh compatibility?
14:57- Orphan mesh part
16:14- Introducing Edit mesh toolset
16:40- Verifying the mesh
22:25- Workshop
33:01- Outro of this tutorial
4 هفته پیش
در تاریخ 1403/03/29 منتشر شده
است.
134
بـار بازدید شده