My Pressure Washer Wont Stay Running - How to Fix
32.1 هزار بار بازدید -
2 سال پیش
-
Your pressure washer wont stay
Your pressure washer wont stay running because it was in storage like mine for quite a while. Although you were able to get it started by cleaning the main jet in the carburetor it just wont stay running under demand. My problem was I had dirty fuel that sat in the tank for over two years without running. The contaminants in the fuel can clog up the carburetor, which will lead to the engine stalling under demand (using the pressure washer or having water pressure). You may have seen the video my neighbor Joe and I made when he helped me with this same pressure washer. The problem was a clogged main jet due to debris in the fuel.
Briggs and Stratton Engine Parts, Supplies U Do It™ List: https://amzn.to/3gKph2p
Small Engine Tools U Do It™ List: https://amzn.to/3VZXWJA
To learn more about this repair read this U Do It™️ article: https://udoit.me/my-pressure-washer-t...
Video Chapters
0:00 Pressure Washer Starts but wont stay running
0:17 Troy Bilt 2800 Max PSI with Briggs & Stratton
0:35 Remove the carburetor main jet for inspection
1:16 Clean main jet ports
1:27 Reinstall Main Jet
1:41 Start Pressure Washer
2:03 Tools needed to replace Carburetor
3:04 Remove Cover
4:07 Remove Air Filter Assembly
5:02 Remove Carburetor and Linkages
6:09 Remove Fuel Line to Carburetor
8:23 Inspect Gaskets and O-Rings - replace if necessary
9:05 Connect Linkages to new Carburetor
9:37 Install Mounting Plate & Carburetor
10:28 Install Spring in correct location
10:50 Cut Fuel Line for new Fuel Filter
12:10 Install new Fuel Filter and Clamps
12:35 Connect Fuel Line to Carburetor and Clamp
12:50 Install Air Filter Housing, Tube to Air Filter, Wires to Switch
15:50 Install Air Filter & Close
16:05 Install Cover
16:39 Fill Fuel Tank with fresh gas
17:17 Check Oil & fill if necessary
18:06 Connect water and Pressure Washer Hose
18:17 Turn on Switch and Start
20:00 Pressure Wash
Briggs and Stratton replacement carburetor as shown in this video: https://amzn.to/3TczwKL
What Can you Check?
- Contaminated fuel in the tank
- Main jet ports clogged
- Air filter dirty
- Spark plug is corroded
- Bad needle valve
“As an Amazon Associate I earn from qualifying purchases.”
Video Credits:
Video Production: U Do It™️ Studios a Division of No Cheese Records™️ LLC All Rights Reserved.
Briggs and Stratton Engine Parts, Supplies U Do It™ List: https://amzn.to/3gKph2p
Small Engine Tools U Do It™ List: https://amzn.to/3VZXWJA
To learn more about this repair read this U Do It™️ article: https://udoit.me/my-pressure-washer-t...
Video Chapters
0:00 Pressure Washer Starts but wont stay running
0:17 Troy Bilt 2800 Max PSI with Briggs & Stratton
0:35 Remove the carburetor main jet for inspection
1:16 Clean main jet ports
1:27 Reinstall Main Jet
1:41 Start Pressure Washer
2:03 Tools needed to replace Carburetor
3:04 Remove Cover
4:07 Remove Air Filter Assembly
5:02 Remove Carburetor and Linkages
6:09 Remove Fuel Line to Carburetor
8:23 Inspect Gaskets and O-Rings - replace if necessary
9:05 Connect Linkages to new Carburetor
9:37 Install Mounting Plate & Carburetor
10:28 Install Spring in correct location
10:50 Cut Fuel Line for new Fuel Filter
12:10 Install new Fuel Filter and Clamps
12:35 Connect Fuel Line to Carburetor and Clamp
12:50 Install Air Filter Housing, Tube to Air Filter, Wires to Switch
15:50 Install Air Filter & Close
16:05 Install Cover
16:39 Fill Fuel Tank with fresh gas
17:17 Check Oil & fill if necessary
18:06 Connect water and Pressure Washer Hose
18:17 Turn on Switch and Start
20:00 Pressure Wash
Briggs and Stratton replacement carburetor as shown in this video: https://amzn.to/3TczwKL
What Can you Check?
- Contaminated fuel in the tank
- Main jet ports clogged
- Air filter dirty
- Spark plug is corroded
- Bad needle valve
“As an Amazon Associate I earn from qualifying purchases.”
Video Credits:
Video Production: U Do It™️ Studios a Division of No Cheese Records™️ LLC All Rights Reserved.
2 سال پیش
در تاریخ 1401/07/22 منتشر شده
است.
32,122
بـار بازدید شده