How to Fix a Pressure Washer That Won't Start / Troy Bilt Pressure Washer / Briggs and Stratton

U Do It
U Do It
702.9 هزار بار بازدید - 7 سال پیش - You are probably here because
You are probably here because your pressure washer won't start. I had the same issue and my neighbor Joe, who is a wizard with engine repair, helped me diagnose the problem and resolve it. Joe went through many of the things he normally looks for when an engine won't start. This is a Troy Bilt 2800 PSI pressure washer model number 020568 with a Briggs and Stratton engine. The same diagnosis will probably work with your pressure washer, lawn mower, generator with a Briggs and Stratton engine. It may even work if it has a different engine. I know it worked for me on two other occasions.

0:00 Intro
0:33 Removing Jet-Main to Check Fuel in Bowl
1:02 Check Float and Needle Valve and Seat Operation
2:02 Attempt to Start Engine
2:33 Attempt to Start with Carb Cleaner
2:45 We need to take apart Carburetor
4:35 Begin Removal of Air Filter Assembly
5:07 Remove Top Cover
5:36 Complete Removal of Air Filter Assembly
6:20 Clamp Fuel Supply Line with Vise Grips
6:35 Remove Fuel Supply Line from Carburetor
7:24 Remove Springs for Choke and Throttle
7:53 Remove Carburetor
11:20 Identify and Fix Problem - Clogged Jet-Main
13:36 Remove Bad Gas
17:36 Reinstall Caburetor, Top Cover and Air Filter
21:15 Fill up with Gas and Start Engine - SUCCESS!!!

Replacement parts for this Briggs & Stratton engine, tools and supplies are available here: https://amzn.to/3VZXWJA

Read more about the pressure washer diagnosis, repair, replacement parts and new issues I'm having with it on U Do It™ here:  https://udoit.me/how-to-fix-a-pressur...

“As an Amazon Associate I earn from qualifying purchases.”
7 سال پیش در تاریخ 1396/08/02 منتشر شده است.
702,907 بـار بازدید شده
... بیشتر