How To Notch Tubing to Build a Roll Cage, Exhaust, Go Cart Chassis - Eastwood Tubing Notcher
420.3 هزار بار بازدید -
9 سال پیش
-
Andy from the Eastwood Research
Andy from the Eastwood Research & Development Department shows you how to properly notch tubing so you get perfect fitment every time, which means stronger construction.
Buy At Eastwood: http://www.eastwood.com/professional-tubing-notcher.html?utm_source=youtube&utm_medium=annotation&utm_content=tubing%20notcher&utm_campaign=2016-01-22
Pro Tubing Notcher - Item 20447
Constructed from solid steel, this easy to use tube notcher is built to perform accurate notches, time after time.
Create notches in 3/4" to 3" Tubing
Adjustable up to 50 Degrees
Accepts standard hole saws
Works with any 1/2" drill
Mounts in a vise or on a bench top
Designed to notch tubing from 3/4 In to 3 In tubing, which means you can build anything from a Go Cart to a 3 In exhaust on your hotrod. Use any 1/2 In hand drill to power the Eastwood Professional Tubing Notcher. Accepts all standard hole saws. Adjustable up to 50 degrees with the loosening of one bolt. Adjust to your desired angle with one hand and lock down the bearing block with your other. Easier adjustment than other designs on the market. Vise or bench top mounting.
If you're restoring a car, truck or motorcycle, you need to visit Eastwood.com today for everything you need to do the job right.
Eastwood - Since 1978
9 سال پیش
در تاریخ 1394/11/02 منتشر شده
است.
420,394
بـار بازدید شده