Make your own 3D Printer : Part 2

Zep Labs
Zep Labs
8 هزار بار بازدید - 5 سال پیش - On the series of how
On the series of how to Make your own 3D Printer,  here comes part 2! Making the main structure of a cantilever FDM printer out of simple stuff you can find around.

Sketchup file of this machine (in actual dimensions):
https://drive.google.com/open?id=1xWA...

Stuff used:
(the links below are affiliates, so if you decide to buy through there I may also make a buck or two. I'm just saying!)

-Controller kit (including stepper drivers, LCD screen & controls):
https://ebay.us/Dr4rst
-Stepper motors for X,Y,Z axis
https://ebay.us/AK0PYU
-Stepper motor mounts(2x)
https://ebay.us/lxJQBo
-Power supply(24v, 250W)
https://ebay.us/LXchjg
-Extruder
https://ebay.us/LSpRUP
-Hotend(24V-bowden-1.75mm)
https://ebay.us/BHBap6
-Pulleys for X,Y motors (x4) (20 tooth, 5mm bore,10 mm belt width)
https://ebay.us/OJAhLb
-Heatbed
https://ebay.us/WrNJgS
-Z axis threaded rod(50cm)
https://ebay.us/8bkE2B
-GT2 belt for X,Y movement(10 mm wide)
https://ebay.us/8bkE2B
-Buck converter( to make 12 V and power the arduino with)
-8x LM12UU linear bearings for Y and Z axis carriage
https://ebay.us/OYt6MQ
-2x LM8LUU longer linear bearings for X axis carriage
https://ebay.us/Lwfdb0
And that was about all!

Tshirts!
https://teespring.com/stores/zep-merch

Until next time,
thanks for watching!
And if you like what you see, feel free to subscribe.
More coming up!

Just want to chip in? Help our tiny place get mightier?! Much appreciated!
https://www.paypal.com/cgi-bin/webscr...

Music:
Cullah - "Lucy" on "Be Love Not Fear"
Cullah - "Where Do Yoy Belong" on "Cullah the Wild"
(http://www.cullah.com)
5 سال پیش در تاریخ 1398/03/17 منتشر شده است.
8,090 بـار بازدید شده
... بیشتر