Make your own 3D Printer : Motors and Driving Systems (Part 3)
6.2 هزار بار بازدید -
5 سال پیش
-
The third video of the
The third video of the Make your own 3D printer this time folks! We are getting there!
This time we are mounting the stepper motors, along with their belts, pulleys, idlers, ACME rod for the vertical axis.
Let's have a look on how that goes, and who knows, next time we may also make a print with this thigy!
.
Sketchup file of this machine (in actual dimensions):
https://drive.google.com/open?id=1xWA...
Stuff used:
(the links below are affiliates, so if you decide to buy through there I may also make a buck or two. I'm just saying!)
-Controller kit (including stepper drivers, LCD screen & controls):
https://ebay.us/Dr4rst
-Stepper motors for X,Y,Z axis
https://ebay.us/AK0PYU
-Stepper motor mounts(2x)
https://ebay.us/lxJQBo
-Power supply(24v, 250W)
https://ebay.us/LXchjg
-Extruder
https://ebay.us/LSpRUP
-Hotend(24V-bowden-1.75mm)
https://ebay.us/BHBap6
-Pulleys for X,Y motors (x4) (20 tooth, 5mm bore,10 mm belt width)
https://ebay.us/OJAhLb
-Heatbed
https://ebay.us/WrNJgS
-Z axis threaded rod(50cm)
https://ebay.us/8bkE2B
-GT2 belt for X,Y movement(10 mm wide)
https://ebay.us/8bkE2B
-Buck converter( to make 12 V and power the arduino with)
-8x LM12UU linear bearings for Y and Z axis carriage
https://ebay.us/OYt6MQ
-2x LM8LUU longer linear bearings for X axis carriage
https://ebay.us/Lwfdb0
And that was about all!
Want your own ZepLabs shirt? Wanna look cool and support this place in the same time?!
https://teespring.com/stores/zep-merch
Just want to chip in? Help our tiny place get mightier?! Much appreciated!
https://www.paypal.com/cgi-bin/webscr...
Until next time,
thanks for watching!
And if you like what you see, feel free to subscribe.
More coming up!
Music:
Cullah - "Grandmaster Blues" on "Be Fear Not Love"
Cullah - "A Place I KNow " on "Cullahnary School"
(http://www.cullah.com)
This time we are mounting the stepper motors, along with their belts, pulleys, idlers, ACME rod for the vertical axis.
Let's have a look on how that goes, and who knows, next time we may also make a print with this thigy!
.
Sketchup file of this machine (in actual dimensions):
https://drive.google.com/open?id=1xWA...
Stuff used:
(the links below are affiliates, so if you decide to buy through there I may also make a buck or two. I'm just saying!)
-Controller kit (including stepper drivers, LCD screen & controls):
https://ebay.us/Dr4rst
-Stepper motors for X,Y,Z axis
https://ebay.us/AK0PYU
-Stepper motor mounts(2x)
https://ebay.us/lxJQBo
-Power supply(24v, 250W)
https://ebay.us/LXchjg
-Extruder
https://ebay.us/LSpRUP
-Hotend(24V-bowden-1.75mm)
https://ebay.us/BHBap6
-Pulleys for X,Y motors (x4) (20 tooth, 5mm bore,10 mm belt width)
https://ebay.us/OJAhLb
-Heatbed
https://ebay.us/WrNJgS
-Z axis threaded rod(50cm)
https://ebay.us/8bkE2B
-GT2 belt for X,Y movement(10 mm wide)
https://ebay.us/8bkE2B
-Buck converter( to make 12 V and power the arduino with)
-8x LM12UU linear bearings for Y and Z axis carriage
https://ebay.us/OYt6MQ
-2x LM8LUU longer linear bearings for X axis carriage
https://ebay.us/Lwfdb0
And that was about all!
Want your own ZepLabs shirt? Wanna look cool and support this place in the same time?!
https://teespring.com/stores/zep-merch
Just want to chip in? Help our tiny place get mightier?! Much appreciated!
https://www.paypal.com/cgi-bin/webscr...
Until next time,
thanks for watching!
And if you like what you see, feel free to subscribe.
More coming up!
Music:
Cullah - "Grandmaster Blues" on "Be Fear Not Love"
Cullah - "A Place I KNow " on "Cullahnary School"
(http://www.cullah.com)
5 سال پیش
در تاریخ 1398/03/24 منتشر شده
است.
6,219
بـار بازدید شده