SNS 147 Part 2: Shop Made Tap Driver
619.9 هزار بار بازدید -
8 سال پیش
-
In this video i show
In this video i show you how you can machine you own "tap drivers" as I like to call them. This is a simple split bushing that is used to hold the odd sized shank of a tap and fit in a standard size collet.
In this video I machine one to fit a standard 5/8" tap, and it will fit in a 7/8" collet and be used to power tap a hole using the machine power.
I use the Victor lathe fro drilling, turning, boring, and parting. I'll also use the DoAll mill to mill the square slot and split it.
Hope you enjoy!
In this video I machine one to fit a standard 5/8" tap, and it will fit in a 7/8" collet and be used to power tap a hole using the machine power.
I use the Victor lathe fro drilling, turning, boring, and parting. I'll also use the DoAll mill to mill the square slot and split it.
Hope you enjoy!
8 سال پیش
در تاریخ 1395/09/27 منتشر شده
است.
619,985
بـار بازدید شده