How to Refinish Drums (Singapore) Series - Part 3: Spray Painting the Hardware
2 هزار بار بازدید -
9 سال پیش
-
I restored another drumset! Check
I restored another drumset! Check it out HERE - Drum Restoration/Refinishing II
Part 3 of 7 part (i think) series.
Part 1: Introduction
Part 2: Stripping the Shell
Part 3: Painting the hardware
Part 4: Prepping the shells for staining
Part 5: Staining the Shells
Part 6: Applying the Finish
Part 7: Re-assembling the Drumset
I'll be splitting up this series into the bite-sized chunks above so that it's easier for any of you guys check out if you actually want to start on a similar project. Its recorded in more of a vlog-ish way rather than a pure instructional because I was finding my way as well!
Breakdown of this video:
Step 1 - Preparing the hardware for spray painting
Step 2 - Spray painting the hardware
Items you will need to have to complete the steps in this Part:
- Sand Paper 800 grit
- Paper towels
- Spray Paint (Rust-oleum Universal Metallic Paint & Primer in one used in the video. I used 2 cans completely)
Disclaimer: I'm not a professional myself and while i hope for this series to be as helpful as possible, its my first time so feel free to ask me anything that's unclear. I'll try my best to help where i can :)
Also, my head is kinda chopped off in most of the videos cause im using my phone's camera and im not very good at this videoing thing. hahaha. Thats also the reason some parts are blurry... apologies if it irritates you.
Part 3 of 7 part (i think) series.
Part 1: Introduction
Part 2: Stripping the Shell
Part 3: Painting the hardware
Part 4: Prepping the shells for staining
Part 5: Staining the Shells
Part 6: Applying the Finish
Part 7: Re-assembling the Drumset
I'll be splitting up this series into the bite-sized chunks above so that it's easier for any of you guys check out if you actually want to start on a similar project. Its recorded in more of a vlog-ish way rather than a pure instructional because I was finding my way as well!
Breakdown of this video:
Step 1 - Preparing the hardware for spray painting
Step 2 - Spray painting the hardware
Items you will need to have to complete the steps in this Part:
- Sand Paper 800 grit
- Paper towels
- Spray Paint (Rust-oleum Universal Metallic Paint & Primer in one used in the video. I used 2 cans completely)
Disclaimer: I'm not a professional myself and while i hope for this series to be as helpful as possible, its my first time so feel free to ask me anything that's unclear. I'll try my best to help where i can :)
Also, my head is kinda chopped off in most of the videos cause im using my phone's camera and im not very good at this videoing thing. hahaha. Thats also the reason some parts are blurry... apologies if it irritates you.
9 سال پیش
در تاریخ 1394/01/24 منتشر شده
است.
2,097
بـار بازدید شده