Neutec Autocast Casting Machine
14.6 هزار بار بازدید -
12 سال پیش
-
The Neutec J-zP induction casting
The Neutec J-zP induction casting machine delivers a cost-effective, high-performance casting system—no other machine in this price range comes close for rugged durability, low operating cost and top-quality castings. A benchtop induction caster with many of the features found in our larger models, the J-zP is designed for small- to medium-sized shops and offer features usually found only in larger, far more costly casting machines.
The J-zP™ adds the advantage of Neutec's Dynamic Pressure System™, a system that applies a positive pressure that works with the vacuum draw to significantly increase fill-rates and reduce defects—especially in small details such as prongs and the lettering on class rings.
Benefits include:
• Increased fill rates—even for fine details. A built-in Busch 15cfm vacuum pump helps ensure the best possible fill rates for all your castings—see fewer rejects and easier finishing.
• Fast cycle times—casting cycles average about four minutes, or 15 flasks per hour. The Dynamic Variable Compensation™ pressure and the Advanced Dynamic Computer™ (ADC) automatically produce the fastest, most efficient melting program for any alloy and any size load—time after time.
• Low reject rates—porosity and other defects caused by oxidation are virtually eliminated by a closed-system nitrogen-gas atmosphere and a graphite crucible that absorbs oxygen dissolved in the metal.
• Superior stirring—with 18 turns on its induction coil, the J-z casting machine heats more quickly with a superior stirring capability that keeps the melt homogeneous up to the moment of the pour.
• Large flask capacity when you need it. The J-z casting machine accepts flasks up to 5" x 9". Take advantage of more opportunities—even cast small sculptures. This machine will also cast flasks as small as a 3" in diameter for smaller runs.
• Extra-roomy crucible—a 184cc graphite crucible, surprisingly large for a machine in this class, batch-alloys up to 2.7kg of 18K or casts up to 1.6kg at a time.
• Make your own grain to your specifications. The grain-making tank (included) lets you mix the karat and color grain you need, when you need it. And you can recycle your own scrap into clean, quality grain. The grain you produce is perfectly sized to deliver more metal capacity and faster melting times, too.
This package includes the Neutec J-z water-cooler stand. All induction casting machines need cooling water. With a closed-loop cooling system that contains and re-uses the cooling water, this cooling system is built into a stand designed to match the floor dimensions of the J-z. Your machine sits directly on top of the cooler, saving space and conveniently raising the machine to eye level.
The J-zP™ adds the advantage of Neutec's Dynamic Pressure System™, a system that applies a positive pressure that works with the vacuum draw to significantly increase fill-rates and reduce defects—especially in small details such as prongs and the lettering on class rings.
Benefits include:
• Increased fill rates—even for fine details. A built-in Busch 15cfm vacuum pump helps ensure the best possible fill rates for all your castings—see fewer rejects and easier finishing.
• Fast cycle times—casting cycles average about four minutes, or 15 flasks per hour. The Dynamic Variable Compensation™ pressure and the Advanced Dynamic Computer™ (ADC) automatically produce the fastest, most efficient melting program for any alloy and any size load—time after time.
• Low reject rates—porosity and other defects caused by oxidation are virtually eliminated by a closed-system nitrogen-gas atmosphere and a graphite crucible that absorbs oxygen dissolved in the metal.
• Superior stirring—with 18 turns on its induction coil, the J-z casting machine heats more quickly with a superior stirring capability that keeps the melt homogeneous up to the moment of the pour.
• Large flask capacity when you need it. The J-z casting machine accepts flasks up to 5" x 9". Take advantage of more opportunities—even cast small sculptures. This machine will also cast flasks as small as a 3" in diameter for smaller runs.
• Extra-roomy crucible—a 184cc graphite crucible, surprisingly large for a machine in this class, batch-alloys up to 2.7kg of 18K or casts up to 1.6kg at a time.
• Make your own grain to your specifications. The grain-making tank (included) lets you mix the karat and color grain you need, when you need it. And you can recycle your own scrap into clean, quality grain. The grain you produce is perfectly sized to deliver more metal capacity and faster melting times, too.
This package includes the Neutec J-z water-cooler stand. All induction casting machines need cooling water. With a closed-loop cooling system that contains and re-uses the cooling water, this cooling system is built into a stand designed to match the floor dimensions of the J-z. Your machine sits directly on top of the cooler, saving space and conveniently raising the machine to eye level.
12 سال پیش
در تاریخ 1391/04/07 منتشر شده
است.
14,618
بـار بازدید شده