How to set up Wohlhaupter® Twin Cutter boring heads at machine spindle

This video demonstrates how to properly set up Wohlhaupter Twin Cutter rough boring heads at the machine spindle. Our rough boring twin cutter tools allow you to pre-machine from small to large diameter holes with short processing times and excellent chip control.

STEP 1: Remove the clamping screws.

Turn the adjusting screws for the insert holder to the smallest possible diameter.  

STEP 2: Place the insert holder on the serration and move it back and forth to be sure there is no dirt or small chips between the body and the insert holder.  

STEP 3: Insert the clamping screws and tighten the clamping screws slightly.  

STEP 4: Place the inserts into the insert pockets. With the correct torque driver, tighten the inserts.

STEP 5: Adjust the first insert holder on the setting device to the target diameter.

STEP 6: Rotate the tool by 180º.

STEP 7: Adjust the second insert holder to the target diameter.

STEP 8: With the specified torque driver, tighten the clamping screws.

For more information about Wohlhaupter Twin Cutter rough boring heads, visit: https://www.alliedmachine.com/Product...

Rough boring catalog: https://alliedmachine.cld.bz/Wohlhaup...

Subscribe to our newsletter: https://go.alliedmachine.com/l/843753...

#engineering #metalworking #cnc #manufacturing #machining101 #tools #precisionmachining