Sharpening End Mills On The Lathe

In this video I show you how I sharpened my dull end mills on my lathe. I setup the end mill in the correct position and use a makeshift tool post grinder to grind the flutes.

Full credit goes to Rob from the Xynudu channel for posting his end mill sharpening video which I used as a guide. You can see that video here - How to sharpen a HSS end mill using a...

• #education
• #end_mill
• #end_mills
• #sharpen
• #sharpen_end_mill
• #lathe
• #tool_post
• #tool_post_grinder