How I Reuse Broken Endmills In My Workshop - Don't Throw Them Away
155.5 هزار بار بازدید -
2 سال پیش
-
G'day everyone,Since having gotten the
G'day everyone,
Since having gotten the mill I have ended up with a little collection of broken endmills. If you use these tools, you're going to break them. Even in their broken state they are a good source of high speed steel which is a great tool steel. In this video I will show you some of the things I have used these broken tools for in the past few months.
Timestamps
0:00 - Introduction
1:21 - Reuse Them In The Mill
2:09 - Use Them As Hardened Pins
2:45 - Use Them As Lathe Tools
4:19 - Lathe Tool Holders For Endmills
5:07 - Lathe Tools I Have Used
6:16 - Using Endmills As Boring Bars
6:43 - HSS Rotary Broaching Tools
7:26 - Tangential Tool Attempt
8:39 - Internal BSP Thread Cutting Tool
9:10 - Centre Drill Deburr Tool
Recycle High Speed Steel
#DIY #Workshop #HSS
Since having gotten the mill I have ended up with a little collection of broken endmills. If you use these tools, you're going to break them. Even in their broken state they are a good source of high speed steel which is a great tool steel. In this video I will show you some of the things I have used these broken tools for in the past few months.
Timestamps
0:00 - Introduction
1:21 - Reuse Them In The Mill
2:09 - Use Them As Hardened Pins
2:45 - Use Them As Lathe Tools
4:19 - Lathe Tool Holders For Endmills
5:07 - Lathe Tools I Have Used
6:16 - Using Endmills As Boring Bars
6:43 - HSS Rotary Broaching Tools
7:26 - Tangential Tool Attempt
8:39 - Internal BSP Thread Cutting Tool
9:10 - Centre Drill Deburr Tool
Recycle High Speed Steel
#DIY #Workshop #HSS
2 سال پیش
در تاریخ 1400/12/29 منتشر شده
است.
155,567
بـار بازدید شده