Honda CBR1000RR-R Fireblade S Dyno
77.2 هزار بار بازدید -
3 سال پیش
-
We put the all-new 2021
We put the all-new 2021 Honda CBR1000RR-R Fireblade SP on the in-house Cycle World dyno to gather real horsepower and torque measurements.
The long-awaited 2021 Honda CBR1000RR-R Fireblade SP created big news in the supersport market as an all-new homologation special aimed at superbike competition. And a much-needed refresh of a legendary platform
Honda provided the Fireblade with an all-new—not revised—999cc inline-four engine with a lot of trickle-down tech from its MotoGP endeavors. Take the 81.0 x 48.5mm bore and stroke configuration for example, which matches the RCV prototype racer’s layout and is much different from the outgoing CBR’s 76.0 x 55.0mm bore and stroke. And that’s not all. There’s a lot of interesting technology used deep within the engine, which our Tech Editor Kevin Cameron covered extensively at the launch of the Fireblade.
We finally got our hands on a US-spec test unit and ran it on our in-house Dynojet 250i dyno, recording horsepower and torque measurements of the Honda. The Fireblade measured a respectable 165.42 hp at 12,000 rpm and 74.58 pound-feet of torque at 10,580 rpm, which is comparable to the 186 hp (at the crankshaft) that Honda claims for the US-spec model but significantly lower than the claimed 214 hp of the EU-spec machine. That’s also a roughly 10 percent improvement in peak horsepower over the outgoing CBR, which we last dyno tested in 2017 when it produced 149.63 hp at 10,540 rpm and 75.97 pound-feet of torque at 10,180 rpm.
Read the full article here: https://www.cycleworld.com/story/bike...
Subscribe to Cycle World Youtube: http://www.youtube.com/c/cycleworld?s...
Read more from Cycle World: https://www.cycleworld.com/
Buy Cycle World Merch: https://teespring.com/stores/cycleworld
The long-awaited 2021 Honda CBR1000RR-R Fireblade SP created big news in the supersport market as an all-new homologation special aimed at superbike competition. And a much-needed refresh of a legendary platform
Honda provided the Fireblade with an all-new—not revised—999cc inline-four engine with a lot of trickle-down tech from its MotoGP endeavors. Take the 81.0 x 48.5mm bore and stroke configuration for example, which matches the RCV prototype racer’s layout and is much different from the outgoing CBR’s 76.0 x 55.0mm bore and stroke. And that’s not all. There’s a lot of interesting technology used deep within the engine, which our Tech Editor Kevin Cameron covered extensively at the launch of the Fireblade.
We finally got our hands on a US-spec test unit and ran it on our in-house Dynojet 250i dyno, recording horsepower and torque measurements of the Honda. The Fireblade measured a respectable 165.42 hp at 12,000 rpm and 74.58 pound-feet of torque at 10,580 rpm, which is comparable to the 186 hp (at the crankshaft) that Honda claims for the US-spec model but significantly lower than the claimed 214 hp of the EU-spec machine. That’s also a roughly 10 percent improvement in peak horsepower over the outgoing CBR, which we last dyno tested in 2017 when it produced 149.63 hp at 10,540 rpm and 75.97 pound-feet of torque at 10,180 rpm.
Read the full article here: https://www.cycleworld.com/story/bike...
Subscribe to Cycle World Youtube: http://www.youtube.com/c/cycleworld?s...
Read more from Cycle World: https://www.cycleworld.com/
Buy Cycle World Merch: https://teespring.com/stores/cycleworld
3 سال پیش
در تاریخ 1399/10/24 منتشر شده
است.
77,288
بـار بازدید شده