CNC Router Accuracy & Backlash
4.6 هزار بار بازدید -
4 سال پیش
-
The Y-Axis of my router
The Y-Axis of my router showed a small amount of backlash from the standard deep grove ball bearing. I decided to change the bearing out for a double row angular contact ball bearing. It is still a compromise but it will fit without doing any modifications to the bearing block.
4 سال پیش
در تاریخ 1399/06/05 منتشر شده
است.
4,685
بـار بازدید شده