CNC Router Gantry Plates
3.9 هزار بار بازدید -
3 سال پیش
-
In this episode I am
In this episode I am machining new beefier aluminum side plates for my CNC Router Gantry.
The challenge will be to drill the 8mm holes, this is something you would normally not do with a spindle and it is an operation that I have not attempted before. The sides are close to 25mm (1") thick so slotting is difficult and chip evacuation is mandatory to keep chips from welding to the cutting edge.
The challenge will be to drill the 8mm holes, this is something you would normally not do with a spindle and it is an operation that I have not attempted before. The sides are close to 25mm (1") thick so slotting is difficult and chip evacuation is mandatory to keep chips from welding to the cutting edge.
3 سال پیش
در تاریخ 1400/06/05 منتشر شده
است.
3,976
بـار بازدید شده