How to make Bacteriophage Virus 3d Model using Thermocol
298.4 هزار بار بازدید -
5 سال پیش
-
Today I'm sharing with you
Today I'm sharing with you bacteriophage model made using thermocol sheet. Labled image is at the end of the video. Hope my videos are helpful. Thanks for watching.
Materials
1. Thermocol/ Styrofoam Sheet (1 inch thick )
2. White Glue
3. Cutting Blades
4. Tissue
5. Colours ( Poster or Acrylic Paint )
6. Water
7. Brushes
The colour cone I use in my Tutorials contains white glue and colour mixed well. I have uploaded video on making a coloured cone.
Coating with Tissue using equal mixture of glue and water
Subscribe to my Channel to watch more Biology Models
Short Guitar and 5 Cents Back by Audionautix is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/...)
Materials
1. Thermocol/ Styrofoam Sheet (1 inch thick )
2. White Glue
3. Cutting Blades
4. Tissue
5. Colours ( Poster or Acrylic Paint )
6. Water
7. Brushes
The colour cone I use in my Tutorials contains white glue and colour mixed well. I have uploaded video on making a coloured cone.
Coating with Tissue using equal mixture of glue and water
Subscribe to my Channel to watch more Biology Models
Short Guitar and 5 Cents Back by Audionautix is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/...)
5 سال پیش
در تاریخ 1397/12/03 منتشر شده
است.
298,488
بـار بازدید شده