Gelli Printing a different approach
215.9 هزار بار بازدید -
12 سال پیش
-
http://andyskinnerorg.blogspot.co.uk/
http://www.andyskinnercrafts.com/
I tried something a little different with my Gelli plate today and thought I would video the process.
This is the finished piece from the video called "After the Storm" The doorway however was added on the right as an after thought.
As you will see in the video I placed a rough sketch of the composition underneath the Gelli plate first and also cut a couple of custom masks from acetate.
Normally I build up my prints with lots of thin translucent layers but for this I applied the paint heavier, often covering much of the layer beneath and painting in my warm and cool tones with the brayer directly onto the plate.
Sorry its hard sometimes to see the prints coming off the plate, the video was too long and I had to speed it up!
http://www.andyskinnercrafts.com/
I tried something a little different with my Gelli plate today and thought I would video the process.
This is the finished piece from the video called "After the Storm" The doorway however was added on the right as an after thought.
As you will see in the video I placed a rough sketch of the composition underneath the Gelli plate first and also cut a couple of custom masks from acetate.
Normally I build up my prints with lots of thin translucent layers but for this I applied the paint heavier, often covering much of the layer beneath and painting in my warm and cool tones with the brayer directly onto the plate.
Sorry its hard sometimes to see the prints coming off the plate, the video was too long and I had to speed it up!
12 سال پیش
در تاریخ 1391/11/11 منتشر شده
است.
215,941
بـار بازدید شده