Gelatin Printing Multiple Layers with One Pull | The SECRET to Success is Patience!
20 هزار بار بازدید -
3 سال پیش
-
Hi there! After several fails
Hi there! After several fails in attempting to print multiple layers with one pull on my gelatin plate, I was finally able to create a nice print. The secret to success is patience, and thin layers of paint! Be sure that each layer of paint is dry to the touch before adding the next layer, and keep the printing paper on the plate for the final pull at least five minutes or more to allow the layers of dry paint to bond with the last wet layer. Enjoy!
Supplies:
Gelli Arts Gelatin plate 8" x 10"
Acrylic paints
Rubber brayer
Stencils ( DIY glue gun stencils, and The Crafters Workshop stencils)
Sulfite paper
Supplies:
Gelli Arts Gelatin plate 8" x 10"
Acrylic paints
Rubber brayer
Stencils ( DIY glue gun stencils, and The Crafters Workshop stencils)
Sulfite paper
3 سال پیش
در تاریخ 1400/07/20 منتشر شده
است.
20,098
بـار بازدید شده