Make A DIY Fork Alignment Gauge - Cheap & Easy!
57.3 هزار بار بازدید -
4 سال پیش
-
I show how to make
I show how to make a cheap, easy fork alignment gauge. I made this one for about $5. For my 1" fork, I used steel flat bar 1/2" wide x 36" long x 1/8" thick. Aluminum flat bar will work also. For a 1 1/8" fork, I suggest using 3/4" wide x 36" long x 1/8" thick.
▶ SUBSCRIBE & HIT THE 🔔 http://bit.ly/SubRJTheBikeGuy
👍 And please give my video a thumbs up 👍
▶FACEBOOK.com/RJTheBikeGuy
Facebook: RJTheBikeGuy
▶TOOLS
http://www.rjthebikeguy.com/tools
▶SHIRTS
http://bit.ly/RJBikeGuyShirts
▶WEBPAGE
http://www.RJTheBikeGuy.com
▶ SUBSCRIBE & HIT THE 🔔 http://bit.ly/SubRJTheBikeGuy
👍 And please give my video a thumbs up 👍
▶FACEBOOK.com/RJTheBikeGuy
Facebook: RJTheBikeGuy
▶TOOLS
http://www.rjthebikeguy.com/tools
▶SHIRTS
http://bit.ly/RJBikeGuyShirts
▶WEBPAGE
http://www.RJTheBikeGuy.com
4 سال پیش
در تاریخ 1399/04/21 منتشر شده
است.
57,321
بـار بازدید شده