How To Make A Headset Cup Remover Tool
212.2 هزار بار بازدید -
11 سال پیش
-
This is my homemade tool
This is my homemade tool to remove headset bearing cups from a bike frame. This is similar to the Park Tool RT-1 Head Cup Remover tool. It cost about $3 to make. I made it from a piece of 3/4" electrical conduit that I bought at the hardware store. The only tools used to make it were a vise, hack saw, and a file to smooth the burrs. I have seen some people make them from copper pipes, but the price of copper has gone up, so copper pipes are not cheap anymore.
Here is the Park Tool version:
http://www.amazon.com/exec/obidos/ASI...
▶ Homemade Bike Tools: http://bit.ly/DIYBikeTools
▶ SUBSCRIBE & HIT THE 🔔 http://bit.ly/SubRJTheBikeGuy
👍 And please give my video a thumbs up 👍
▶FACEBOOK.com/RJTheBikeGuy
Facebook: RJTheBikeGuy
▶TOOLS
http://www.rjthebikeguy.com/tools
▶SHIRTS
http://bit.ly/RJBikeGuyShirts
▶WEBPAGE
http://www.RJTheBikeGuy.com
Here is the Park Tool version:
http://www.amazon.com/exec/obidos/ASI...
▶ Homemade Bike Tools: http://bit.ly/DIYBikeTools
▶ SUBSCRIBE & HIT THE 🔔 http://bit.ly/SubRJTheBikeGuy
👍 And please give my video a thumbs up 👍
▶FACEBOOK.com/RJTheBikeGuy
Facebook: RJTheBikeGuy
▶TOOLS
http://www.rjthebikeguy.com/tools
▶SHIRTS
http://bit.ly/RJBikeGuyShirts
▶WEBPAGE
http://www.RJTheBikeGuy.com
11 سال پیش
در تاریخ 1392/12/27 منتشر شده
است.
212,207
بـار بازدید شده