Design Modeler basic tutorial 16 - 90 Deg Bend 1/5
2.7 هزار بار بازدید -
5 سال پیش
-
In this part 1 of
In this part 1 of workshop (total 5 parts) we will create geometry of 90 deg bend (90 deg Elbow).
We will use sweep command to create this geometry.
For more detailed CFD learning, please follow us on udemy:
http://bit.ly/Udemy_CFD1
http://bit.ly/UdemyCFD_2
http://bit.ly/UdemyCFD_3
http://bit.ly/Udemy_CFD4
http://bit.ly/Udemy_CFD5
http://bit.ly/Udemy_CFD6
We will use sweep command to create this geometry.
For more detailed CFD learning, please follow us on udemy:
http://bit.ly/Udemy_CFD1
http://bit.ly/UdemyCFD_2
http://bit.ly/UdemyCFD_3
http://bit.ly/Udemy_CFD4
http://bit.ly/Udemy_CFD5
http://bit.ly/Udemy_CFD6
5 سال پیش
در تاریخ 1398/10/16 منتشر شده
است.
2,742
بـار بازدید شده