ANSYS Fluent Tutorial : Fluid Flow In a 90 degree Bend Pipe | ANSYS 2019 R2 Tutorial
42.4 هزار بار بازدید -
5 سال پیش
-
There is a 90-degree bend
There is a 90-degree bend pipe. The pipe outlet velocity variation at different bend radius has been shown. Water has been taken as the working fluid in this analysis.
What You Will Learn from this tutorial?
- Application of new plane creation using point and normal options.
- Inflation layer setup in Meshing.
- Solver Set up for turbulent flow modeling.
- Output parameter setup.
Please Subscribe to our channel and press the bell icon for notification regarding our upcoming Uploads.
Our Facebook Page: Facebook: ansystutor7
Telegram Group: t.me/ansystutor
#ansystutorials #ansys2019R2 #CFD
What You Will Learn from this tutorial?
- Application of new plane creation using point and normal options.
- Inflation layer setup in Meshing.
- Solver Set up for turbulent flow modeling.
- Output parameter setup.
Please Subscribe to our channel and press the bell icon for notification regarding our upcoming Uploads.
Our Facebook Page: Facebook: ansystutor7
Telegram Group: t.me/ansystutor
#ansystutorials #ansys2019R2 #CFD
5 سال پیش
در تاریخ 1398/07/20 منتشر شده
است.
42,405
بـار بازدید شده