Motor Controls: Using an Ice Cube Relay to Start a VFD

#AccessToPower #AccessElectric #MotorControls
https://accesstopower.com
In this episode of AccessToPower, we show you how to wire up and use an ice cube relay to start a VFD drive when it is programmed to start with a 2 wire start signal. We used an 8 pin relay with a start-stop button and a 3-wire start stop circuit to open and close the relay. We then used the other Normally open contact on the relay to start the drive.

• #education
• #accesstopower
• #electrical_contractor
• #electrical_training
• #access_electric
• #ice_cube_relay
• #8_pin_relay
• #ladder_diagrams
• #motor_control
• #3_wire_startstop
• #relay_logic
• #motor_starter
• #start_stop
• #access_to_power
• #ice_cube_relay_wiring
• #motor_control_wiring
• #ladder_diagrams_basics
• #vfd_wiring
• #starting_a_vfd_with_a_relay
• #start_stop_circuit
• #start_stop_button
• #start_stop_motor_control_wiring
• #variable_frequency_drive
• #vfd_start_stop
• #electrician_training
• #access_electric