BF30 CNC #11 - AC Servo Spindle Upgrade
20.5 هزار بار بازدید -
3 سال پیش
-
Big thanks to PCBWay for
Big thanks to PCBWay for sponsoring this video. Check them out here: https://www.pcbway.com
The stock motor of my mill bit the dust, so it was time for an upgrade. As I had been wanting some more speed and control, I settled on a 1.5kw servo motor to replace the stock DC motor. This gives me very fine control over the spindle speed and lots of feedback. To mount the new spindle, I needed some custom mounts, that I had to machine. While I was at it, I also converted the spindle to belt drive instead of the stock gears, to cut down on the noise a bit.
The servo I used: https://s.click.aliexpress.com/e/_9yc9ZC
Want to support me directly and look extra stylish? Check out my merch: https://merch.datulab.tech
Music by Zweihänder, check it out here: https://t.co/BpLpIm8lYz
Support me (for free) while shopping online (affiliate links):
-----------------------------------------------------------------------------------------------------------------
Aliexpress: http://s.click.aliexpress.com/e/b3a0ISl6
Amazon (US): https://amzn.to/2pJVveJ
Amazon (DE): https://amzn.to/2pK1YFx
eBay.com: http://ebay.us/xd6vPa
eBay.de: http://ebay.us/AwHtLQ
-----------------------------------------------------------------------------------------------------------------
My links:
-----------------------------------------------------------------------------------------------------------------
Instagram: Instagram: darkartguitars
Website: https://www.darkartguitars.com
Thingiverse: https://www.thingiverse.com/DatulabTech
Github: https://github.com/datulab
E-Mail: [email protected]
-----------------------------------------------------------------------------------------------------------------
00:00 Preview
00:17 Intro
00:35 PCBWay
01:10 Servo Overview
04:00 Conversion Montage
05:21 Setup Explained
08:20 Machining Montage
10:48 My Experience With the Servo
14:47 Electronics Overview
The stock motor of my mill bit the dust, so it was time for an upgrade. As I had been wanting some more speed and control, I settled on a 1.5kw servo motor to replace the stock DC motor. This gives me very fine control over the spindle speed and lots of feedback. To mount the new spindle, I needed some custom mounts, that I had to machine. While I was at it, I also converted the spindle to belt drive instead of the stock gears, to cut down on the noise a bit.
The servo I used: https://s.click.aliexpress.com/e/_9yc9ZC
Want to support me directly and look extra stylish? Check out my merch: https://merch.datulab.tech
Music by Zweihänder, check it out here: https://t.co/BpLpIm8lYz
Support me (for free) while shopping online (affiliate links):
-----------------------------------------------------------------------------------------------------------------
Aliexpress: http://s.click.aliexpress.com/e/b3a0ISl6
Amazon (US): https://amzn.to/2pJVveJ
Amazon (DE): https://amzn.to/2pK1YFx
eBay.com: http://ebay.us/xd6vPa
eBay.de: http://ebay.us/AwHtLQ
-----------------------------------------------------------------------------------------------------------------
My links:
-----------------------------------------------------------------------------------------------------------------
Instagram: Instagram: darkartguitars
Website: https://www.darkartguitars.com
Thingiverse: https://www.thingiverse.com/DatulabTech
Github: https://github.com/datulab
E-Mail: [email protected]
-----------------------------------------------------------------------------------------------------------------
00:00 Preview
00:17 Intro
00:35 PCBWay
01:10 Servo Overview
04:00 Conversion Montage
05:21 Setup Explained
08:20 Machining Montage
10:48 My Experience With the Servo
14:47 Electronics Overview
3 سال پیش
در تاریخ 1400/05/15 منتشر شده
است.
20,590
بـار بازدید شده