2019 2020 2021 Chevrolet Silverado M&R Single 30in LED Light Bar Installation
2.8 هزار بار بازدید -
2 سال پیش
-
⚒️Full install of M&R Automotive
⚒️Full install of M&R Automotive single 30in light bar for the 2019 2020 2021 2022 2023 Silverado Chevrolet.
Mike shows you step-by-step: remove the grille, install M&R light bar and wiring.
Check out the complete M&R Automotive catalog https://www.MandRonline.com.
Always adding new trucks to the M&R family.
📦WHAT YOU GET?
One 30in light bar
Choose Amber, White, or White output with Amber DRL backglow
Includes all mounting hardware
No cutting or drilling required. The kit is a complete bolt on behind the grille
*This truck also has single and dual 40in light bar set up
The wiring harness used for installation was the following. We did not use the white wire since we did not need 2 leads.
https://a.co/d/enaaWXQ
➡️30in LIGHT BAR SPECS
🔆 WHITE 🔆
LEDs: 28pcs x 5W
Power: 140 watt
Luminous flux: 11,760 Lumens
🔆 AMBER 🔆
LEDs: 28pcs x 3W
Power: 84 watt
Luminous flux: 5,500 Lumens
🔆Light bar with White output and Amber DRL backglow has the same light output as the white light bar above, but the amber acts as a DRL feature. It doesn't produce light, but gives off a beautiful backglow with a switch of a button. DRL (daytime driving lights).
✌️Have an easy install & enjoy your next adventure brighter.
👋All M&R Automotive light kits are for off road use only. Please enjoy them responsibility.
0:00 - Intro
0:19 - take off grille
2:14 - light bar install
3:53 - wiring
Mike shows you step-by-step: remove the grille, install M&R light bar and wiring.
Check out the complete M&R Automotive catalog https://www.MandRonline.com.
Always adding new trucks to the M&R family.
📦WHAT YOU GET?
One 30in light bar
Choose Amber, White, or White output with Amber DRL backglow
Includes all mounting hardware
No cutting or drilling required. The kit is a complete bolt on behind the grille
*This truck also has single and dual 40in light bar set up
The wiring harness used for installation was the following. We did not use the white wire since we did not need 2 leads.
https://a.co/d/enaaWXQ
➡️30in LIGHT BAR SPECS
🔆 WHITE 🔆
LEDs: 28pcs x 5W
Power: 140 watt
Luminous flux: 11,760 Lumens
🔆 AMBER 🔆
LEDs: 28pcs x 3W
Power: 84 watt
Luminous flux: 5,500 Lumens
🔆Light bar with White output and Amber DRL backglow has the same light output as the white light bar above, but the amber acts as a DRL feature. It doesn't produce light, but gives off a beautiful backglow with a switch of a button. DRL (daytime driving lights).
✌️Have an easy install & enjoy your next adventure brighter.
👋All M&R Automotive light kits are for off road use only. Please enjoy them responsibility.
0:00 - Intro
0:19 - take off grille
2:14 - light bar install
3:53 - wiring
2 سال پیش
در تاریخ 1401/02/15 منتشر شده
است.
2,894
بـار بازدید شده