How to install Start-Scan Car LED Hood Light
496.1 هزار بار بازدید -
2 سال پیش
-
Installation tips: 1. Apply double-sided
Installation tips:
1. Apply double-sided tape to the two inner sides of the cover.
2.Fix the light bar on the double-sided tape.
3.Wire connection:
A. The black wire is connected to the negative pole + the red wire is connected to the ACC = the engine starts to light up.
B. The black wire is connected to the negative pole + the red wire is connected to the DRL = turn on the DRL to light up.
C. You can install anywhere you want
buy it:
https://sourl.cn/ZHLawz
1. Apply double-sided tape to the two inner sides of the cover.
2.Fix the light bar on the double-sided tape.
3.Wire connection:
A. The black wire is connected to the negative pole + the red wire is connected to the ACC = the engine starts to light up.
B. The black wire is connected to the negative pole + the red wire is connected to the DRL = turn on the DRL to light up.
C. You can install anywhere you want
buy it:
https://sourl.cn/ZHLawz
2 سال پیش
در تاریخ 1401/10/05 منتشر شده
است.
496,139
بـار بازدید شده