How to Replace O2 Sensor Bank 1 Downstream 2010-2016 Cadillac SRX
13.5 هزار بار بازدید -
2 سال پیش
-
Buy Now!New O2 Oxygen Sensor
Buy Now!
New O2 Oxygen Sensor Set from 1AAuto.com http://1aau.to/id/1AEEK01288
This video shows you how to install new TRQ oxygen sensors on your 2010-2016 Cadillac SRX. This video specifically shows how to install the bank 1 downstream sensor. The Oxygen (O2) sensors help monitor the emissions system in your vehicle. They measure the amount of oxygen passing through the exhaust, which informs the computer about proper fuel/air mixture, and the condition of the catalytic converter. Over time, the sensors may fail due to contamination, or reaching the end of their service life. TRQ offers new O2 sensors made to manufacturer’s specifications.
This process should be similar on the following vehicles:
2010 Cadillac SRX
2011 Cadillac SRX
2012 Cadillac SRX
2013 Cadillac SRX
2014 Cadillac SRX
2015 Cadillac SRX
2016 Cadillac SRX
Tools you will need:
• 22mm Socket http://1aau.to/odc/1AXAA00266
• O2 Sensor Socket
• Side Cutters
• Ratchet http://1aau.to/oTw/1AXAA00016
• Socket Extensions http://1aau.to/oPz/1AXAA00015
• Torque Wrench http://1aau.to/ozJ/1AXAA00044
• Wire Ties
Subscribe: @trq
Check out our playlist:
Cadillac SRX 2010-2016 2nd Generation: Cadillac SRX 2010-2016 2nd Generation
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
New O2 Oxygen Sensor Set from 1AAuto.com http://1aau.to/id/1AEEK01288
This video shows you how to install new TRQ oxygen sensors on your 2010-2016 Cadillac SRX. This video specifically shows how to install the bank 1 downstream sensor. The Oxygen (O2) sensors help monitor the emissions system in your vehicle. They measure the amount of oxygen passing through the exhaust, which informs the computer about proper fuel/air mixture, and the condition of the catalytic converter. Over time, the sensors may fail due to contamination, or reaching the end of their service life. TRQ offers new O2 sensors made to manufacturer’s specifications.
This process should be similar on the following vehicles:
2010 Cadillac SRX
2011 Cadillac SRX
2012 Cadillac SRX
2013 Cadillac SRX
2014 Cadillac SRX
2015 Cadillac SRX
2016 Cadillac SRX
Tools you will need:
• 22mm Socket http://1aau.to/odc/1AXAA00266
• O2 Sensor Socket
• Side Cutters
• Ratchet http://1aau.to/oTw/1AXAA00016
• Socket Extensions http://1aau.to/oPz/1AXAA00015
• Torque Wrench http://1aau.to/ozJ/1AXAA00044
• Wire Ties
Subscribe: @trq
Check out our playlist:
Cadillac SRX 2010-2016 2nd Generation: Cadillac SRX 2010-2016 2nd Generation
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
2 سال پیش
در تاریخ 1401/01/26 منتشر شده
است.
13,520
بـار بازدید شده