DIY CNC 006 - Gantry Assembly and Bracket Installation
2.6 هزار بار بازدید -
9 ماه پیش
-
▶ Subscribe to my website
▶ Subscribe to my website (free): https://www.thehardwareguy.co.uk/subs...
▶ CNC Build Page: https://www.thehardwareguy.co.uk/diy-...
I've reached another significant milestone – I've successfully assembled the entire frame for both the Y and X-Axis. This involved machining various smaller components like the ball screw bearing plates, Y-Axis motor plates, and Y-Axis bearing blocks, all of which required precise machining to ensure top-notch performance for the machine. The most exciting part of this update is the machining and assembly of the X-Axis gantry. It really brings the machine to life and demonstrates its incredible capabilities and strength.
In terms of value for money, this DIY build is hard to beat; you won't find a CNC machine of this size with a frame as robust at this price point anywhere else in the market.
00:00 Intro
01:04 Overview of the Parts and Technical Drawings
10:09 Machining the Parts
12:59 The Challenge of Drilling Larger Holes
15:15 Drlling and Tapping Holes to Attach the Brackets
24:33 Brackets Installed
25:02 Joining the Bearing Block and Gantry Side Plates
33:47 Drilling the Remaining Holes in the Gantry Side Plates
35:10 The Most Difficult Hole of the Project
39:10 Cleaning Oil off the Parts and Deburring
42:26 Aligning and Machinig the Gantry Back Plate
47:11 Make do with what you have
52:17 The Lost Tapes / Outro
55:04 Discord
▶Carveco: https://store-us.carveco.com/?ref=the...
▶DISCOUNT CODE: HWG5OFF
----------------------------------------------------------------------------------------
▶▶ Watch the whole series of videos:
▶ Part 1: DIY CNC 001 - Introduction
▶ Part 2: DIY CNC 002 - Specification & Hardware
▶ Part 3: DIY CNC 003 - Tools for Machining Alu...
▶ Part 4: DIY CNC 004 - Drilling, Counterboring...
▶ Part 5: DIY CNC 005 - Y-Axis Frame Assembly
▶ Part 6: DIY CNC 006 - Gantry Assembly and Bra...
▶ Part 7: DIY CNC 007 - Z-Axis Assembly
▶ Part 8: DIY CNC 008 - Linear Rail Installation
▶ Part 9: DIY CNC 009 - Surface Board, Spindle ...
▶ Part 10: DIY CNC 010 - Closed Loop NEMA Wiring...
▶ Part 11: DIY CNC 011 - VFD and Spindle Test
▶ Part 12: DIY CNC 012 - Electrical Control Box
▶ Part 13: DIY CNC 013 - Configuration & Basic T...
▶ Part 14: DIY CNC 014 - Motor Tuning, Squarenes...
----------------------------------------------------------------------------------------
▶ CNC Build Page: https://www.thehardwareguy.co.uk/diy-...
I've reached another significant milestone – I've successfully assembled the entire frame for both the Y and X-Axis. This involved machining various smaller components like the ball screw bearing plates, Y-Axis motor plates, and Y-Axis bearing blocks, all of which required precise machining to ensure top-notch performance for the machine. The most exciting part of this update is the machining and assembly of the X-Axis gantry. It really brings the machine to life and demonstrates its incredible capabilities and strength.
In terms of value for money, this DIY build is hard to beat; you won't find a CNC machine of this size with a frame as robust at this price point anywhere else in the market.
00:00 Intro
01:04 Overview of the Parts and Technical Drawings
10:09 Machining the Parts
12:59 The Challenge of Drilling Larger Holes
15:15 Drlling and Tapping Holes to Attach the Brackets
24:33 Brackets Installed
25:02 Joining the Bearing Block and Gantry Side Plates
33:47 Drilling the Remaining Holes in the Gantry Side Plates
35:10 The Most Difficult Hole of the Project
39:10 Cleaning Oil off the Parts and Deburring
42:26 Aligning and Machinig the Gantry Back Plate
47:11 Make do with what you have
52:17 The Lost Tapes / Outro
55:04 Discord
▶Carveco: https://store-us.carveco.com/?ref=the...
▶DISCOUNT CODE: HWG5OFF
----------------------------------------------------------------------------------------
▶▶ Watch the whole series of videos:
▶ Part 1: DIY CNC 001 - Introduction
▶ Part 2: DIY CNC 002 - Specification & Hardware
▶ Part 3: DIY CNC 003 - Tools for Machining Alu...
▶ Part 4: DIY CNC 004 - Drilling, Counterboring...
▶ Part 5: DIY CNC 005 - Y-Axis Frame Assembly
▶ Part 6: DIY CNC 006 - Gantry Assembly and Bra...
▶ Part 7: DIY CNC 007 - Z-Axis Assembly
▶ Part 8: DIY CNC 008 - Linear Rail Installation
▶ Part 9: DIY CNC 009 - Surface Board, Spindle ...
▶ Part 10: DIY CNC 010 - Closed Loop NEMA Wiring...
▶ Part 11: DIY CNC 011 - VFD and Spindle Test
▶ Part 12: DIY CNC 012 - Electrical Control Box
▶ Part 13: DIY CNC 013 - Configuration & Basic T...
▶ Part 14: DIY CNC 014 - Motor Tuning, Squarenes...
----------------------------------------------------------------------------------------
9 ماه پیش
در تاریخ 1402/08/08 منتشر شده
است.
2,606
بـار بازدید شده