Briggs Generator Neutral Unbonding Switch Installation
933 بار بازدید -
2 سال پیش
-
Disclaimer:
"This video is for
Disclaimer:
"This video is for informational purposes only and
is what I did for my own purposes. I am not an electrician
and you should consult your generator manufacturer for
any modifications (if any) required or their recommendations
for your purposes including an electrician for codes in your area."
This is a Briggs and Statton 13500 8000W generator with GFCI and with neutral bonded to generator ground. A switch was installed to turn neutral bonding On for generator use and Off for possible connection to the house that is already meutral bonded. This is especially important for my purposes with copper gas lines.
2 سال پیش
در تاریخ 1401/03/19 منتشر شده
است.
933
بـار بازدید شده