E-Beam 1 Evaporation - Running & Unloading (CHA Electron Beam)
6.4 هزار بار بازدید -
10 سال پیش
-
View the SOP documentation
View the SOP documentation
http://www.inrf.uci.edu/sop-ebeam1/
This tool is a four-pocket e-beam evaporator used for depositing Au, Ti, Ni, Cr, Si, Ge and Pt. Other materials need to be cleared with the staff. The wafers are loaded on a stationary planetary substrate holder. The system will pump down to the base pressure of 2e-6 Torr using a cryo pump. The pumping speed is typically two hours. The metal deposition thickness is measured in real-time by an INFICON model XTC/2 crystal monitor.
http://www.inrf.uci.edu/sop-ebeam1/
This tool is a four-pocket e-beam evaporator used for depositing Au, Ti, Ni, Cr, Si, Ge and Pt. Other materials need to be cleared with the staff. The wafers are loaded on a stationary planetary substrate holder. The system will pump down to the base pressure of 2e-6 Torr using a cryo pump. The pumping speed is typically two hours. The metal deposition thickness is measured in real-time by an INFICON model XTC/2 crystal monitor.
10 سال پیش
در تاریخ 1393/07/17 منتشر شده
است.
6,420
بـار بازدید شده