Pinion Shafts Turned in the CNC Lathe
64.2 هزار بار بازدید -
8 ماه پیش
-
I have recently gotten back
I have recently gotten back into training with Fusion 360 and this job is the first project that I have successfully drawn up using the Fusion CAD and CAM. These parts are pinion shafts for cnc routers that are no longer available from the manufacturer and my customer wanted a batch of 8 to have as spares. It took some trial and errors but after getting the program adjusted I was able to knock out 8 shafts that were dead on accurate in a very short amount of time.
If you're looking for help with Fusion 360 contact Kevin @MechanicalAdvantage He offers hourly training via Zoom and he's been very helpful for me so far!
https://www.mechanicaladvantage.com
Paypal Channel Donation: https://www.paypal.com/cgi-bin/webscr...
Support though Patreon: Patreon: abom79
My Amazon store where I'm adding many of the tools and products I use in my own shop. Amazon.com/shop/abom79
Visit my second Youtube channel where you can follow our travels, camping, RVing, cooking, and bbq! @AbomAdventures
If you're looking for help with Fusion 360 contact Kevin @MechanicalAdvantage He offers hourly training via Zoom and he's been very helpful for me so far!
https://www.mechanicaladvantage.com
Paypal Channel Donation: https://www.paypal.com/cgi-bin/webscr...
Support though Patreon: Patreon: abom79
My Amazon store where I'm adding many of the tools and products I use in my own shop. Amazon.com/shop/abom79
Visit my second Youtube channel where you can follow our travels, camping, RVing, cooking, and bbq! @AbomAdventures
8 ماه پیش
در تاریخ 1402/08/20 منتشر شده
است.
64,265
بـار بازدید شده