Adjusting Stall Homing On The Onefinity CNC

How to adjust the Stall Homing feature on the Onefinity CNC machine.
If your axis keeps going, go DOWN in amp numbers, 1.0, .9, .8, .7 etc.  If your axis stops short, go UP in amp numbers, 1.0, 1.1, 1.2, 1.3, 1.4, etc. until it works correctly.

You may need to adjust stall homing from time to time during the life of the machine.  Changes in the environment, seasonal changes, static electricity, expansion and contraction, etc. can have an affect on the stall homing.  Expect to adjust this during the change from hot to cold and cold to hot seasons.
Please note, adjusting stall homing has no affect on rail movement during cutting and jogging.

https://www.onefinitycnc.com
https://forum.onefinitycnc.com

#cnc #onefinitycnc #stallhoming

Updated 10/27/21

• #howto_style
• #cnc
• #onefinity
• #onefinity_cnc
• #onefinity_homing
• #onefinity_cnc_homing
• #onefinity_cnc_stall_homing
• #onefinity_woodworker
• #onefinity_machinist
• #onefinity_cnc_machine
• #onefinity_cnc_review
• #onefinity_cnc_vs_shapeoko
• #onefinity_cnc_support
• #cnc_machine