How to restore and seal an old car gastank!| The right way!
355 بار بازدید -
3 ماه پیش
-
After a super long search
After a super long search we finally got a good used GVR4 gastank! Now with an old and rare gas take it’s very important that you prep and seal it so it dose not rust again!
Here is an over view of what we did!
1- strip the tank of any loose rust/ paint down to bare metal.
2 - clean tank fully inside and out with a degreaser.
3- use Por-15 metal prep on inside and out of the tank and teat whole tank.
4- make sure tank is fully dry inside and out.
5- coat outside with Por-15. Min of 2 coats.
6 - let dry
7 - por full contents of Por-15 tank sealer inside tank and seal tank.
8- move take around in deferent positions to make sure inside is fully coated.
9- drain excess.
10- let dry for 96 hours.
With the tank fully treated you’ll never have any issues with your tank rusting out! Well I hope haha! Follow along for the car build!
Follow on ig @Jspecrutz
#carbuild #galant #galantvr4 #mitsubishi #projectcars #carrestoration
Here is an over view of what we did!
1- strip the tank of any loose rust/ paint down to bare metal.
2 - clean tank fully inside and out with a degreaser.
3- use Por-15 metal prep on inside and out of the tank and teat whole tank.
4- make sure tank is fully dry inside and out.
5- coat outside with Por-15. Min of 2 coats.
6 - let dry
7 - por full contents of Por-15 tank sealer inside tank and seal tank.
8- move take around in deferent positions to make sure inside is fully coated.
9- drain excess.
10- let dry for 96 hours.
With the tank fully treated you’ll never have any issues with your tank rusting out! Well I hope haha! Follow along for the car build!
Follow on ig @Jspecrutz
#carbuild #galant #galantvr4 #mitsubishi #projectcars #carrestoration
3 ماه پیش
در تاریخ 1403/01/13 منتشر شده
است.
355
بـار بازدید شده