Making a DIY CNC Metal Lathe | Chip Covers and Geometry | #7

Today I'd like to share with you this weeks progress on my DIY CNC metal lathe. I mounted the chip covers (still waiting for the ballscrew cover delivery). I also did some adjustments on the geometry of the machine due to the cone making-error. I hope you will enjoy the video.

Check out also some more detailed videos about wiring the electronics:
Setup of stepper motors 👉 How To Wire up Stepper Motors and Set...
VFD wiring 👉Connecting a 2.2kW AC Motor with VFD ...
CNC Breakout 👉Board setup Connecting Stepper Motors to CNC Brea...
VFD MACH3 setup 👉 How To Setup a Spindle VFD Inverter W...


Part 1 [The Frame] : 👉 Making a DIY CNC Metal Lathe  | The F...
Part 2 [The Spindle]: 👉 Making a DIY CNC Metal Lathe  | The S...
Part 3 [The Tool Post]: 👉 Making a DIY CNC Metal Lathe  | The L...
Part 4 [The X and Z Axis]: 👉 Making a DIY CNC Metal Lathe  | The X...
Part 5 [The Control Box]: 👉 Making a DIY CNC Metal Lathe  | The C...
Part 6 [The Lathe Chuck]: 👉Making a DIY CNC Metal Lathe  | The L...
Part 7 [Geometry and Chip Covers]: 👉Making a DIY CNC Metal Lathe  | Chip ...

Subscribe and hit the like button if you like the video and want more!
If you have any questions - comment down below.
Thanks for watching!

00:00 Intro
00:22 Covers assembly
02:13 Geometry adjustment
03:40 Dial indicator test
04:42 Turning test
06:25 Outro

Facebook Page      👉 Facebook: GBWMCNC
YouTube Channel  👉👉gbwmweldingmachiningcnc