How to find a polarity inversion using Smaart® [GSwSST32]

To verify polarity using Smaart:
1. Set delay finder to auto tracking.
2. Start signal generator playing through all speakers.
3. Place microphone close enough that you can take an isolated measurement.
4. Store trace and verify matching phase and impulse response.
5. For sub, disable delay auto tracking.
___
Get Started with Sound System Tuning - Get Started with Sound System Tuning
___
SOUND SYSTEM TUNING ONLINE COURSE - https://www.proaudioworkshopseeingsou...
___
Books on sound system tuning - https://www.sounddesignlive.com/audio...
Podcast for live sound engineers - https://www.sounddesignlive.com/pro-a...
___
START HERE - https://www.sounddesignlive.com/start...
___
Be friendly
Facebook - Facebook: sounddesignlive
Twitter - Twitter: nathandofrango
LinkedIn - LinkedIn: nathanlively
___

I love to geek out about the physics of sound. This channel focuses on the growing opportunity for live sound engineers to improve their confidence and consistency through the understanding of the principles of sound system design and optimization. My goal is to make this channel upfront and honest about my success and failure, so you can learn from both.

I am always open to suggestions and feedback so please comment on this video or contact me through my site.
_______________
Smaart® and the Smaart logo are registered trademarks of Rational Acoustics LLC and are not affiliated with Nathan Lively or Sound Design Live.

• #science_technology
• #smaart
• #speaker
• #polarity
• #subwoofer
• #impulse_response
• #phase