CNC Router Tips: The first line of every G-Code program
2.6 هزار بار بازدید -
5 سال پیش
-
CNC Router programming using Fusion
CNC Router programming using Fusion 360 and G-Code from https://gcodetutor.com/cnc-router-pro....
A lesson from the course 'CNC Router programming'
The safety line is the first line of code that we add to the start of the G-Code program and after each tool change.
By adding this line, if we stop the CNC machine halfway through and restart it, the machine resets any active commands, cycles, and offsets so there are no nasty surprises and the machine will run safely.
This new course teaches the CNC router owner to produce any part using both Fusion 360 and coding G-Code by hand!
Plus many tips and tricks from an Aerospace CNC machine tools engineer.
A lesson from the course 'CNC Router programming'
The safety line is the first line of code that we add to the start of the G-Code program and after each tool change.
By adding this line, if we stop the CNC machine halfway through and restart it, the machine resets any active commands, cycles, and offsets so there are no nasty surprises and the machine will run safely.
This new course teaches the CNC router owner to produce any part using both Fusion 360 and coding G-Code by hand!
Plus many tips and tricks from an Aerospace CNC machine tools engineer.
5 سال پیش
در تاریخ 1398/05/03 منتشر شده
است.
2,689
بـار بازدید شده