Let's write G-Code - Programming a CNC Lathe to make a bush - part 5. Finish boring sequence.

The fifth video in my new series 'Let's write G-Code' G-Code tutorial.
This is the fifth part of a 6 part series on how we can program a CNC Lathe to produce a simple bush.

Look over my shoulder as I write a complete program to make this part.

In this lesson, we focus on writing a finish bore sequence.

Like all programming languages, there are different versions of the language depending on the machine and version of the FANUC control system you are using.
In this video, I teach a generic version of G-Code that can be easily adapted to the version of G-Code that your machine uses. The lesson is designed to give you a general understanding of the GCode language and not to be used in your machine 'as is'

For free articles on programming G-Code:
https://gcodetutor.com/articles.html

For my CNC lathe programming course:
https://gcodetutor.com/cnc-machine-tr...

For my complete G-Code training course:
https://gcodetutor.com/gcode-bundle.html

Speeds and feeds maths course:
https://gcodetutor.com/speeds-feeds.html

G71 roughing cycle:
https://gcodetutor.com/cnc-machine-tr...

Cutter compensation / Tool nose radius compensation:
https://gcodetutor.com/gcode-tutorial...

Part 1 of this series can be found here: Let's write G-Code - Programming a CN...
Part 2 of this series can be found here: Let's write G-Code - Programming a CN...
Part 3 of this series can be found here: Let's write G-Code - Programming a CN...
Part 4 of this series can be found here: Let's write G-Code - Programming a CN...

Part 6 of this series can be found here: Let's write G-Code - Programming a CN...

• #education
• #gcode
• #g_code
• #cnc_programming
• #cnc_lathe
• #cnc_machine_programming
• #gcode_tutorial
• #learn_gcode