How do I replace my oil seals in a Mercruiser Alpha one gearcase

Please see http://www.sterndrive.info/alpha-one/  for tech support and exploded view drawing.

This video includes the following instructions:
*A1 Installing upper gearcase oil seal kit
*A2 Remove outdrive top
*A3 Grease u-joint
*A4 Remove u-joint clips
*A5 Remove u-joint
*A7 Remove retainer
*A9 Remove yoke shaft
*B2 Remove driven gear
*B3 Remove small oil seal
*B5 Remove large oil seal
*B7 Polish inside of gearcase
*B8 Inspect seal area
*C2 Drawing of Alpha One parts for upper gearcase
*D1 Coat with Loctite
*D5 Installed small oil seal
*D6 87500 Seal kit parts
*D7 Install large oil seal
*D8 Seal installer
*E4 Polishing the shaft
*E6 Take out yoke
*E9 Install carrier
*F2 Install bearing
*F3 Line the bearing up
*F6 Install on bearing and test
*F8 Check bearings and gears
*G1 Install yoke shaft
*G2 Install retainer
*G3 Install o ring
*G4 Install bolts
*G5 Test play in gears
*G7 Grease shifter
*G8 Install tube
*G9 Pressure test
*H1 Tools you may need

• #autos_vehicles
• #mercruiser_alpha_one_gearcase
• #alpha_one_gearcase
• #alpha_one_repair
• #mercruiser_alpha_one_repair
• #alpha_one_parts
• #alpha_one_tools
• #alpha_one_seal_kit
• #alpha_one_yoke
• #alpha_one_gear_set
• #alpha_one_u_joint