(24). Design Shear Walls using General Reinforcing Method-Etabs- tall buildings design
10.4 هزار بار بازدید -
4 سال پیش
-
Etabs has three methods to
Etabs has three methods to design design share walls.
- Simplified C&T Design method
- Uniform Reinforcing method
- General reinforcing method
in this lesson we are going to learn how to design shear walls of our 20 story building using general reinforcing method. This method allows us to add hidden columns ordinary to the shear walls.
All Parts: ETABS: 20 Story Building Design
Part 01: (01) Designing a 20 story building - ...
Part 02: (02) Strat new project and material p...
Part 03: (03) Define Section Properties- Tall ...
Part 04: (04) prepare the DXF file in AutoCad-...
Part 05: (05) Import the DXF file in ETABS- Ta...
Part 06: (06) Define the load patterns- Tall B...
Part 07: (07) Define The Mass Source- Tall Bu...
Part 08: (08) Define The Load Combinations- T...
Part 09: (09) Assign Loads- Tall Buildings De...
Part 10: (10). Automatically Meshing- Tall Bu...
Part 11: (11) Assign Pier Labels or Spandrel-...
Part 12: (12) Assign The Frame Section- Tall ...
Part 13: (13). Assign Diaphragm and Run the A...
Part 14: (14) Check The P-Delta effect- Tall...
Part 15: (15). Check The Eccentricity- Tall B...
Part 16: (16) Check The Soft Story Irregulari...
Part 17: (17) Check The Heavy Story Irregular...
Part 18: (18) Check The Torsional Irregularit...
Part 19: (19) Check The Story Drifts- Tall Bu...
Part 20: (20). Modal Analysis (Dynamic Analys...
Part 21: (21). Response Spectrum - Tall Build...
Part 22: (22). Check Spectrum Irregularity & d...
Part 23: (23). Design Core Walls using Uniform...
Part 24: (24). Design Shear Walls using Gener...
Part 25: (25). Design Columns and Beams - Eta...
- Simplified C&T Design method
- Uniform Reinforcing method
- General reinforcing method
in this lesson we are going to learn how to design shear walls of our 20 story building using general reinforcing method. This method allows us to add hidden columns ordinary to the shear walls.
All Parts: ETABS: 20 Story Building Design
Part 01: (01) Designing a 20 story building - ...
Part 02: (02) Strat new project and material p...
Part 03: (03) Define Section Properties- Tall ...
Part 04: (04) prepare the DXF file in AutoCad-...
Part 05: (05) Import the DXF file in ETABS- Ta...
Part 06: (06) Define the load patterns- Tall B...
Part 07: (07) Define The Mass Source- Tall Bu...
Part 08: (08) Define The Load Combinations- T...
Part 09: (09) Assign Loads- Tall Buildings De...
Part 10: (10). Automatically Meshing- Tall Bu...
Part 11: (11) Assign Pier Labels or Spandrel-...
Part 12: (12) Assign The Frame Section- Tall ...
Part 13: (13). Assign Diaphragm and Run the A...
Part 14: (14) Check The P-Delta effect- Tall...
Part 15: (15). Check The Eccentricity- Tall B...
Part 16: (16) Check The Soft Story Irregulari...
Part 17: (17) Check The Heavy Story Irregular...
Part 18: (18) Check The Torsional Irregularit...
Part 19: (19) Check The Story Drifts- Tall Bu...
Part 20: (20). Modal Analysis (Dynamic Analys...
Part 21: (21). Response Spectrum - Tall Build...
Part 22: (22). Check Spectrum Irregularity & d...
Part 23: (23). Design Core Walls using Uniform...
Part 24: (24). Design Shear Walls using Gener...
Part 25: (25). Design Columns and Beams - Eta...
4 سال پیش
در تاریخ 1399/01/29 منتشر شده
است.
10,463
بـار بازدید شده