(09) Assign Loads- Tall Buildings Design - Etabs
5.9 هزار بار بازدید -
4 سال پیش
-
This video will explain the
This video will explain the ways to apply the loads to the building .
All Parts: ETABS: 20 Story Building Design
Part 01: (01) Designing a 20 story building - ...
Part 02: (02) Strat new project and material p...
Part 03: (03) Define Section Properties- Tall ...
Part 04: (04) prepare the DXF file in AutoCad-...
Part 05: (05) Import the DXF file in ETABS- Ta...
Part 06: (06) Define the load patterns- Tall B...
Part 07: (07) Define The Mass Source- Tall Bu...
Part 08: (08) Define The Load Combinations- T...
Part 09: (09) Assign Loads- Tall Buildings De...
Part 10: (10). Automatically Meshing- Tall Bu...
Part 11: (11) Assign Pier Labels or Spandrel-...
Part 12: (12) Assign The Frame Section- Tall ...
Part 13: (13). Assign Diaphragm and Run the A...
Part 14: (14) Check The P-Delta effect- Tall...
Part 15: (15). Check The Eccentricity- Tall B...
Part 16: (16) Check The Soft Story Irregulari...
Part 17: (17) Check The Heavy Story Irregular...
Part 18: (18) Check The Torsional Irregularit...
Part 19: (19) Check The Story Drifts- Tall Bu...
Part 20: (20). Modal Analysis (Dynamic Analys...
Part 21: (21). Response Spectrum - Tall Build...
Part 22: (22). Check Spectrum Irregularity & d...
Part 23: (23). Design Core Walls using Uniform...
Part 24: (24). Design Shear Walls using Gener...
Part 25: (25). Design Columns and Beams - Eta...
All Parts: ETABS: 20 Story Building Design
Part 01: (01) Designing a 20 story building - ...
Part 02: (02) Strat new project and material p...
Part 03: (03) Define Section Properties- Tall ...
Part 04: (04) prepare the DXF file in AutoCad-...
Part 05: (05) Import the DXF file in ETABS- Ta...
Part 06: (06) Define the load patterns- Tall B...
Part 07: (07) Define The Mass Source- Tall Bu...
Part 08: (08) Define The Load Combinations- T...
Part 09: (09) Assign Loads- Tall Buildings De...
Part 10: (10). Automatically Meshing- Tall Bu...
Part 11: (11) Assign Pier Labels or Spandrel-...
Part 12: (12) Assign The Frame Section- Tall ...
Part 13: (13). Assign Diaphragm and Run the A...
Part 14: (14) Check The P-Delta effect- Tall...
Part 15: (15). Check The Eccentricity- Tall B...
Part 16: (16) Check The Soft Story Irregulari...
Part 17: (17) Check The Heavy Story Irregular...
Part 18: (18) Check The Torsional Irregularit...
Part 19: (19) Check The Story Drifts- Tall Bu...
Part 20: (20). Modal Analysis (Dynamic Analys...
Part 21: (21). Response Spectrum - Tall Build...
Part 22: (22). Check Spectrum Irregularity & d...
Part 23: (23). Design Core Walls using Uniform...
Part 24: (24). Design Shear Walls using Gener...
Part 25: (25). Design Columns and Beams - Eta...
4 سال پیش
در تاریخ 1399/01/11 منتشر شده
است.
5,917
بـار بازدید شده