MPCNC Primo Build Ep. 09 Installing trucks and Belts
9.5 هزار بار بازدید -
3 سال پیش
-
Here we assemble our MPCNC
Here we assemble our MPCNC on the table. Put the belts on, with some difficulty. Install the core and square it up. I did not go into all the details on squaring it up, its just a lot of back and forth with a tape measure. I only got mine within a couple millimeters for now since I am unsure if my plasma setup will work, or if I will be tearing it all apart and redoing it as a router.
V1 Engineering Squaring things up
https://docs.v1engineering.com/mpcnc/...
https://docs.v1engineering.com/mpcnc/...
Credit goes to V1 Engineering for doing all the work. They sell all the parts to complete this build, you can just assemble one if you please.
https://www.v1engineering.com/
I don't go into all the details. Step by step instructions start here thanks to V1 Engineering. https://docs.v1engineering.com/mpcnc/....
Printed on a Creality Ender 3 0.4 nozzle, 60 mms, 0.28 layer height, gst3d and sunlu filament.
Files downloaded at https://www.thingiverse.com/thing:458....
Sliced with Cura 4.8
3/4 EMT galvanized tubing for all the legs and later rails.
I reprinted the belt tensioners with 0.16 layer height, 50mms, 45% infill and 6 walls.
V1 Engineering Squaring things up
https://docs.v1engineering.com/mpcnc/...
https://docs.v1engineering.com/mpcnc/...
Credit goes to V1 Engineering for doing all the work. They sell all the parts to complete this build, you can just assemble one if you please.
https://www.v1engineering.com/
I don't go into all the details. Step by step instructions start here thanks to V1 Engineering. https://docs.v1engineering.com/mpcnc/....
Printed on a Creality Ender 3 0.4 nozzle, 60 mms, 0.28 layer height, gst3d and sunlu filament.
Files downloaded at https://www.thingiverse.com/thing:458....
Sliced with Cura 4.8
3/4 EMT galvanized tubing for all the legs and later rails.
I reprinted the belt tensioners with 0.16 layer height, 50mms, 45% infill and 6 walls.
3 سال پیش
در تاریخ 1399/11/29 منتشر شده
است.
9,593
بـار بازدید شده